Two houses with identical solar systems can get very different bills depending on a single line in the utility tariff: what the utility pays for the electricity the panels send back to the grid. Under classic net metering, each exported kilowatt-hour offsets a kilowatt-hour you would otherwise buy at the full retail rate. Under net billing, exports are credited at a lower rate, often tied to wholesale or avoided-cost prices, so the same panels are worth less to the owner. In 2026, more states are moving new customers from the first model to the second, and the rules for people who already own systems are usually different from the rules for people who sign this year.

The Difference, Using Round Numbers

The mechanics are easier to see with hypothetical numbers. Say your utility charges 30 cents per kilowatt-hour and your system exports 400 kWh in a month. Under full retail net metering, that export is credited at about 30 cents, or $120 against your bill. Under a net billing tariff that pays 6 cents, the same export is worth $24. The difference is $96 a month, which is why installers building proposals for net billing states lean on batteries and on shifting use to daytime hours. The figures here are illustrations, not any particular utility’s rates.

Two further terms are worth knowing. Net metering often banks excess credits month to month, while some net billing designs net your use and production in short intervals, so a solar kilowatt-hour consumed in the house is valued differently from one exported. And “retail rate” rarely means the whole bill: fixed charges, minimum bills, and delivery charges can still apply, as the examples below show.

What 2026 Policy Activity Looks Like

The NC Clean Energy Technology Center, which publishes the quarterly 50 States of Solar series, counted 284 distributed solar policy and rate actions in 45 states plus the District of Columbia and Puerto Rico in the second quarter of 2026. The largest category was compensation rules for distributed generation, at 53 actions across 24 states and Puerto Rico. Community solar drew 48 actions, and residential fixed charge or minimum bill increases drew 45 in 28 states and Puerto Rico. Three of its top developments bear directly on this question:

  • Maryland: The governor signed H.B. 1532 in May 2026. It requires regulators to adopt a successor to the existing net metering program with a lower compensation rate and a combined cap of 6,000 MW for both tariffs, to be in place by the earlier of July 1, 2027 or when the existing tariff reaches its 3,000 MW cap. It also prioritizes net metering applications already in the queue.
  • Virginia: Regulators gave Dominion Energy a partial approval of its net metering successor. Dominion may move to net billing with usage and production netted on a 30-minute basis, but the report describes this as for visibility and tracking only, which functionally maintains the current monthly netting. The order rejected the proposed application fee and allowed a much lower monthly administrative fee.
  • Connecticut: Legislators ordered regulators to create successor programs for residential and non-residential net metering and for community solar, to be finalized by April 2028, with consideration of storage, dynamic pricing, and the value of distributed generation.

Maryland and Virginia show a pattern worth noticing. “Successor” does not always mean a dramatic cut on day one, and it does not mean nothing changes. The terms for people who apply after a certain date can differ meaningfully from the terms for people already in the queue.

States Where the Shift Has Already Happened

Several states have been through the transition, and their experience shows what the second model looks like in practice.

California. The Net Billing Tariff applies to systems interconnected on or after April 15, 2023. Export credits follow the state’s Avoided Cost Calculator, which varies by hour and month, and industry summaries describe the rates as locked in for nine years based on the year the system goes into service. Those same sources put the average export credit at roughly a quarter of retail rates, which is why California proposals almost always include storage.

Illinois. Since January 1, 2025, new residential customers of ComEd, Ameren, and MidAmerican are credited for exports at their electricity supply rate rather than the full retail rate, according to the Illinois Shines program. They still pay delivery charges on gross usage. Illinois Shines puts the average 2025 supply price in ComEd territory at 8.3 cents per kilowatt-hour and in Ameren territory at 9.1 cents. Customers already interconnected before the change kept the earlier arrangement.

Idaho. Idaho Power moved residential solar from net metering to real-time net billing on January 1, 2024, after the Idaho Public Utilities Commission authorized the change in late December 2023. The export credit varies by time of day, reported at roughly 4.8 to 17 cents per kilowatt-hour.

Arizona. Arizona’s export rate, called the Resource Comparison Proxy, can fall by up to 10% a year for new customers, who are then locked in at the rate they received for a period of years. The Court of Appeals also vacated Arizona Public Service’s grid access charge for solar customers in 2026 on procedural grounds, and the charge was sent back for further proceedings, per the NC Clean Energy Technology Center.

Where Retail-Style Credit Still Applies, and for How Long

Several states still describe their programs as retail-rate net metering, but most of them are in some stage of review.

New Jersey’s regulations define net metering as crediting customer-generators at the full retail rate for each kilowatt-hour produced, up to annual use, with leftover credit paid at avoided cost at year-end. The state’s Board of Public Utilities staff has said the state exceeded the statutory 5.8% threshold in the energy year that ended May 31, 2024, which opened a proceeding on the program’s future. Check the board’s docket for where that process stands before you assume today’s terms hold for a new system.

Even where retail-rate crediting survives, other pieces of the bill can eat into it. Fixed charges and minimum bills, one of the busiest categories of policy activity this spring, do exactly that. Our guide to how net metering works explains the baseline mechanics, and our piece on net metering policy changes for existing systems covers grandfathering.

What to Ask When You Get a Quote

  1. Which tariff will my system be on, and what is the name of it? Get the rate schedule, not a summary.
  2. What date locks my terms, and how long does the lock last? Some rules attach to the application date; others to the date the system is turned on.
  3. Does a pending successor program apply to me? In Maryland, being in the queue matters. In Connecticut, regulators have until April 2028.
  4. What does the production estimate assume for exports? A model that values exports at retail rates in a net billing state overstates savings.
  5. How are fixed charges handled in the savings math?
  6. Does adding a battery change the tariff or the export value?

Tariffs change faster than articles, so verify against the current rate schedule and the state’s commission docket, and use DSIRE as a cross-check. The core question will not change: for every kilowatt-hour your panels make that the house does not use at that moment, what does the utility pay, and for how long is that number guaranteed? That is the figure a good solar proposal puts in writing.